Product Description

Product Description

Vehicle charging inlet for charging with alternating current (AC) and direct current (DC), compatible with type 1 AC and CCS vehicle charging connectors (EVSE), for installation in electric vehicles for electromobility (EV).

 

Our advantages

•  Complete product range

•  Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001

• Safe against overheating with temperature measurement at every DC power contact

• Integrated interlock during charging

•  Manual emergency release of the locking actuator

•  Protected and sealed against dirt and water with a high degree of protection

 

Technical Data

 

Mechanical Performance

Mating Cycles

10000 cycle

Electrical Performance

Rated current

DC+/DC-:200A;

L1/N:48A;   CS/CP:2A

Rated voltage

DC+/DC-:1000V DC ;

L1/N:250V AC ;

CS/CP 30V AC

Withstand voltage

Between DC+、DC-、PE :3000V AC ;

Between L1、N、PE  : 2000V AC;

Between CS、CP :500V AC

Insulation Resistance

1000V DC, ≥2000MΩ;

Temperature rise

<50K

Environmental Performance

IP degrees of Protection

IP55(Mated)

Operation Temperature

-40℃~+40℃

Temperature  Measurement

Temperature monitoring         

Temperature Sensing Module

(PT1000 or NTC ,according to customer selection)

Locking  Actuator

Operating voltage

12V

Material

Shell

PA

Seal

Silicone Rubber

Contact

Copper Alloy

 

 

  Cable

 

Item

 

Cable structure

External Cable Diameter

1

DC+/DC-

70mm2

Φ17.9±0.3mm

2

PE

25mm2

Φ8.6±0.2mm

3

L1、N

6mm2

Φ14.7±0.2mm

4

CS/CP

0.5mm2

Φ 1.6±0.2mm

5

DC+ Temp1

0.5mm2

Φ 1.6±0.2mm

6

DC- Temp2

0.5mm2

Φ 1.6±0.2mm

7

L1 Temp3

0.5mm2

Φ 1.6±0.2mm

8

Locking actuator

0.5mm2

Φ 1.6±0.2mm

 

 

   Dimensional

Request Quote

If you need help, you can leave us a message